Transfer Paper
Instructions
Requires NO Vinegar Wash!
Print, Iron-on and your Done!
Directions
1. Use your favorite software to create a transfer design. Print Highest Quality Photographic Transfers up to 1440 dpi or Higher!
2. Print design on the white side of the transfer paper.
3. Iron design onto a pre-shrunk t-shirt, wood plaque or any porous surface. (Set iron on Cotton or Hottest Setting and Iron Green Line side of paper. Do not use steam!)
For Best Results:
1. Set printer on glossy setting, photo quality, or Preimium Ink-Jet quality setting in printer setup.
2. When you filp the paper over to iron it onto the T-Shirt everything on the page ( Text or Logo's ) will reverse. * So if your printing a ( Text or Logo's ) in your Transfer, Use the horizontal flip option on your graphics software or right when you go to print hit printer Properties and Check off the botton for horizontal flip in the Print setup, Hit ok, then Print.
3. For a shiny finish, peel transfer from fabric when cool.
4. For a matte finish, peel transfer from fabric when hot.
(Color Coppier Paper Must be Peeled HOT Only)
Care:
1. Wash and dry on cool setting. Do not iron over transfer.
Important:
Key Source's maximum obligation shall be to replace any paper which has proven to be defective. Key Source shall not be liable for any injury, direct or consequential, arising out of the use of, or inability to use this paper. Before using this paper, always test to determine the suitability of the paper for use in conjunction with your equipment and methods.
|
|
|
Copyright © 2008 • 